Two-signal BMS assistant

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

ian0 asked Dec 4, '23

I can set the BMS assistant to force the charger to float if aux input is closed.

Does that mean that the converse is true, and it will force the charger to bulk/absorption if the aux input is open?

Assistants

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-12-04T20:22:27Z

Mike Dorsett answered · Dec 04, 2023 at 08:22 PM

No, the Charger will decide on voltage which mode it will be in, as per normal charge curve.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-12-05T19:43:45Z

ian0 answered · Dec 05, 2023 at 07:43 PM

Thanks.

You mean it could be in float, even if the aux input is open? (assuming closed forces it into float)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.