question

Paul avatar image
Paul asked

Multiplus PV not showing on cerbo screen or on VRM

20231203-140636.jpg20231203-140649.jpgI have a MultiPlus-II 24/3000/70-32 hooked up to a cerbo gx and i also monitor and control it via VRM but my system has never shown the solar PV box on the screen, i can see my PV charge/overall DC power balance via the DC box on the screen as i also have a smart shunt connected via VE direct to the Cerbo,the Multiplus is connected via VE bus to the Cerbo, have done latest updates,rebooted etc etc ,as the images show, the POV charge shows on my system 1 but not on my system 2, any ideas ?

system status on cerbo gx
20231203-140636.jpg (2.0 MiB)
20231203-140649.jpg (1.4 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

What model is the solar PV box? How is it connected to the Cerbo?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul avatar image Paul commented ·
Howdy, it is incorporated in an easysolar Multiplus 2 GX Inverter,Charger,MPPT all in one, the multiplus is connectred to the Cerbo via VE Bus,cheers
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic