This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
A question for Victron developers, in a way...
From Victron website, I know that "In mid-2023 the Multi RS was revised from a single MPPT tracker to a dual MPPT tracker model".
But on 5.99 VictronConnect app, on the status tab (first tab), it shows just a single MPPT, with only one input.
It's a thing that will later be corrected?
Thank you.
Ok, so it is a known limitation. There isn't a committed time where it will be addressed and the outcome will depend on what is required. So, eventually you may be able to see them individually, but this may not be possible due to other limitations.
It is definitely a combined output.
Wonder if the hardware is the same as the MPPT RS'es...
Considering the topic for shadow management where there is a 1.16 beta for testing.
And where Guy said that if all OK, will be available for Multi RS'es too.
Another reason for having this dual display...
I am yet to connect the Multi RS with a Cerbo GX to see if there, on GX menu, I can individually see each MPPT...
I only have the hardware for a couple of days and didn't had the chance to test them thoroughly... :-))
Now, after I've studied more in depth the app, I realized that on the first tab (Overview - where all is graphically displayed), the MPPT is a combined total power.
But on second tab (Status - where info is textually represented), the MPPT power is individually displayed: Solar1 and Solar2.
So, the issue could be closed, because it's OK and enough in this way.
This is what happens when you behave like an engineer and wander quickly, anxiously and aimlessly through options and not paying attention... :-))
I suspect it is a combined output from both and not individually displayed.
That was also my thought, but still it would be nice to see at a glance the individual production of two different PV banks...
Thanks.
