Hi everyone,my name is frank,i'm a technician in optics with a good electronics background and this is my first post....
I'm glad this forum exists and as i can see there is for ex Guy Stewart from Victron -hi there-who seems to care about developments and issues in general.A great thanks for all your comments and suggestions,as we can all learn from each other!
I've been slowly pushing up a once small backup system,as we are on a unstable and unreliable grid with voltage spikes up to 260Vac.
After years of hard work,having harvested in the last few years almost 25MW and beeing to 92% off grid i reached to have quite a powerful plant.
My question/request would be: I am interested in moving eccessive pv power to an electric boiler.This is done by relais which are (to a cirtain amount) programable in base of pv/grid,pv powerand timer.Nice would bee additional parameters like soc and so on.
I have a water heater which has got three elements and therefore three indipendent relais are switching these elements to a total of three kilowatt.
Would you please consider something similar to your next firmware,if necessary with the option to obtain an additional relais board?
Best regards from northern Italy,Frank
