question

ondra avatar image
ondra asked

Problem with the EV charging station in VRM, Cerbo

Hello,

unfortunately I have a problem with the EV charging station. I can't get communication between Cerbo / VRM and Wallbox working. I tried everything I could think of and the tips I found in the discussions. I connect to Cerbo from Walbox, I see the installation status. Charging an electric car via the web interface works.

1700419420941.png

1700419437275.png


Unfortunately, communication does not work the other way around. In VRM, I can only see the Wallbox in the Device List, but that's all, it can't be seen anywhere else (Dashboard and similar). I have Modbus TPC enabled in Cerbo. The HW has the latest FW installed.

1700419478694.png

1700419488964.png

1700419502423.png

Please advise what to try next.

Thank you Ondra

cerbo gxVRMev charging station
1700419420941.png (230.5 KiB)
1700419437275.png (186.3 KiB)
1700419478694.png (43.8 KiB)
1700419488964.png (122.6 KiB)
1700419502423.png (157.0 KiB)
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

can I have a look?
0 Likes 0 ·
1 Answer
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Solved, I have downgraded the Venus OS to the latest official. Careful with betas.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ondra avatar image ondra commented ·

Thank you Lucian. Of course, I tried several beta versions and the official release before writing here. Unfortunately, I must have done something wrong. Thank you for your quick response and help. Ondra

0 Likes 0 ·
Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ ondra commented ·
With pleasure!


0 Likes 0 ·