This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
newly I don't see AC input data from my grid meter ET112 on my VRM dashboard:
But I can see it on my remote console:
Any idea what happened?
Maybe this is the reason?
VRM changelog:
Dashboard: Fixed AC Input value having a different value from console for some installations
Regards,
Gerd
@kocki I have a ET112 grid meter fitted, of which when I lose the connection between the Multiplus & the ET112, I have the same situation, no value on the VRM. I found out it was a bad connection on to the ET112 with the data cables. Then the issue reappeared when I fitted a USB hub. I removed the hub and the issue went away. The hub would intermittently disconnected the ET112, several times a hour. Just some ideas to try and check.
Hi Jason,
thanks, I'll try this next time I'm back on my boat, but it takes a while.
Hi Jason,
it doesn't work.
Is there another fix for this issue available?
I don't believe that the grid value will show on the VRM dashboard if the Multi is off/missing.
It is a feature that has been around for a while.
The dash is built around an operational multiplus/quattro at the moment, you can chart it with advanced widgets though.
I just realized it's working now with my ET112, GREAT and THANKS!
Tried to upload a screenshot, but get this error message:
"Parsing response failed"
why?
Regards,
Gerd
