question

CM avatar image
CM asked

VRM Data Feed

Hello is it possible for the AC Loads to show output voltage again , i am guessing there’s a bug since the area has been blank for sometime now and i am pretty sure it was showing voltage prior to this . Thank you

img-7947.jpeg

VRM
img-7947.jpeg (253.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @CM,

This voltage would always be the voltage setting (e.g 230V) of the inverter or the AC input voltage (which is shown in AC-input when connected).

Why would you need to see it on AC-output?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

CM avatar image CM commented ·

Arghh I see your logic , same applies for when grid is connected

0 Likes 0 ·