Mulitplus2 Firmware update issues

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Rob Duthie asked Jul 17, '19

Firmware update for Mulitplus2 Ver 2625460 causes unit not to go online or connect to the grid

at all. Reinstalled old version 2625459 all is OK? Any answers to why?

firmware update

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B commented · Jul 17, 2019 at 12:17 PM

just did my unit and all worked well but my FW update was 2626461

my unit is a Multiplus II 48/5000 and I just checked and there is a 2625461 on the site so maybe try that first

0 ·

Show more comments

Answer 1 · 2019-07-17T11:22:15Z

pba answered · Jul 17, 2019 at 11:22 AM

You are right. There was an issue with the Multiplus-II and 460.

We just released 461 for the MultiPlus-II. This will solve the problem.

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Rob Duthie commented · Jul 17, 2019 at 11:41 AM

Cheers for that PBA, i thought is was going mad, after many attempts and wasted time.

0 ·

Answer 2 · 2019-07-17T11:51:48Z

Rob Duthie answered · Jul 17, 2019 at 11:51 AM

Hi all use only 461 for Mulitplus2 units, if you want the mains to reconnect, as 460 does not connect to the mains supply at all.

Thanks to PBA for a quick solution.

Regards

Rob D

NZ

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.