question

trimix avatar image
trimix asked

Wifi Connection with MTTP 100/30 and smart shunt 500a

I was wondering the best way to get these two products to connect to the wifi and an Iphone? I only want to use I/O to monitor the system. Will i need two connectors one for the shunt and one for the mttp seeing they are far mounted from each other.

connection issue
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
kevgermany avatar image
kevgermany answered ·

If your MPPT has Bluetooth, set up a smart network over Bluetooth. Use Bluetooth with Victron Connect App to connect your phone to the units.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

trimix avatar image
trimix answered ·

I am currently using the blue tooth and was trying to figure out a way to have it wifi capable seeing i am running star-link in my rv.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic