This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have turned on MQTT on my CCGX and I am able to subscribe and get messages. I want to be able to change the generator start/stop rules which are based on the Battery state of charge. They are current at 50% and 70% but I want to be changing them programmatically depending on forecasts. Does anyone know the topic to publish to so these values could be changed?
All the paths are actually found on the dbus_generator source code here. In my specific case, I wrote to the following paths:
Genset SOC stop value (upper threshold)
"W/{portal_id}/settings/0/Settings/Generator0/Soc/StopValue" with payload {"value": 71.0}
This sets the upper threshold to 71% and the generator stops running when SOC is 71%
Genset SOC start value (lower threshold)
"W/{portal_id}/settings/0/Settings/Generator0/Soc/StartValue" with payload {"value": 50.0}
This sets the lower threshold to 50% and the generator stops running with SOC is 50.0
@clasence, out of curiosity, are you going to adjust them based on machine-friendly forecasts or manually every once in awhile?
