question

richardlocat avatar image
richardlocat asked

2 controllers Smart MPPT 100/30 connected to BMV 712

Both controllers are working fine at ''Bulk' and ''absortion'' mode but one stop working at ''Float'' mode, Why?. Both controllers have version 1.39. I noticed that one controller blink every 3 second at ''bulk''mode, Why?

smart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

One Controller has shut down as the other controller is all thats needed to keep the batteries in float.

Ie the voltage on one mppt maybe reading very slightly higher than the other

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

richardlocat avatar image richardlocat commented ·

Thanks Paul for your answer, why one controller blink every 3 sec at ''bulk'' mode even is charging similar amps to the other one that is not blinking?

0 Likes 0 ·
wkirby avatar image wkirby ♦♦ richardlocat commented ·

Out of curiosity, are any of your MPPT's connected to the BMV as your question title suggests?

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic