This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm running v.1.61 firmware.
Roughly once every 2 weeks it switches to Settings-->Battery-->ChargerEnabled = OFF all by itself
I can remedy it by switching it back to ON - but it's annoying and shouldn't be happening.
Has anyone else had this and solved it?
Is the MPPT also connected to a GX product (Venus GX, Cerbo GX, etc)?
With kind regards,
Thiemo van Engelen
No, I just use the Bluetooth interface
Did you also change the BLE pincode of the MPPT? Could it be that somebody else is messing with the installation?
Kind regards,
Thiemo van Engelen
The pin is changed from standard. It is the same pin as the other MPPT (100/30 Smart) in the system. The 100/30 never has the same problem.
The only thing that I can think of that you can try is to power cycle the MPPT by disconnecting it from PV and battery for a minute and then reconnecting it battery first.
Kind regards,
Thiemo van Engelen
