I have a Pheonix inverter connected to a Venux GX. Currently, I use the Modbus protocol to gather information about the inverter. I was wondering if it was possible to gather the same information but with CANbus from the port can2 ?
Thanks,
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Pheonix inverter connected to a Venux GX. Currently, I use the Modbus protocol to gather information about the inverter. I was wondering if it was possible to gather the same information but with CANbus from the port can2 ?
Thanks,
I don’t think that is possible.
There is a bit of discussion here that goes into the details of the second CANbus port:
https://groups.google.com/d/topic/victron-dev-venus/-AJzKTxk-3k/discussion
That may be useful.
I´ve got a system here where the MPPTs are chain connected to VE.Can and the Pylontech hub to CAN2
It seems to work, but after studying the VGX manual it looks like to be connected wrong.
Any advice on this please?
4 People are following this question.