This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I have a Victron system (3xMultiPlus-II 48/3000 / 6xPylontech US3000C / Raspberry GX). I also have an old SMA system (1xSunnyIsland SI 6.0H / 1xlead battery 48V - 6 PzS 930). I would like to replace the SMA-Sunnyisland with a Victron MultiPlus-II 48/5000/70-50. Can I get this controlled with one GX (2 different batteries systems) or do I need another GX?
No. Each combo of inverter/battery will be independent and appear on a unique vrm page.
They will not be aware of each other and are independently configured and managed.
A GX can only control one independent set of inverter/bms.
If I use 2 Victron GXs, can I let them communicate with each other? Or do I have to control the 2 Victron GX to prevent recharging between the two batteries.
