question

nasko73 avatar image
nasko73 asked

How to disable external control on Smart Solar MPPT 150/85 tr

Hello . Did is possible to use settings from Smart Solar to charge battery .? And turn off external control?

only way what found is if dellete ESS Assistant on Multiplus II . But then when grid is available Multiplus is turn off - inverting only if is diconected from grid

i need to use Smart Solar NOT controled from Multiplus assistant .

Did have any possibility for this ?

Thanks

MPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@nasko73

You can in the mppt itself.

Remove BMS control...

A real simple way is to remove it from the GX and set it to stand alone.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nasko73 avatar image nasko73 commented ·
I`ts controled from Multiplus II ,Not from BMS . I not found any way to disable this . I still search how to turn off external control over SmartSolar MPPT . Not know why VICTRON not allow Smart MPPT to work in standalone mode when is connected to Cerbo GX and Multiplus II
1 Like 1 ·
vanko avatar image vanko nasko73 commented ·

Have you figured that out already? I have the same problem and till now here I only got the answer "you need to read a lot more".

0 Likes 0 ·
Show more comments