In the CCGX manual there is a section that states thhe following:
Minimum input current limit values
"When PowerAssist is enabled in VEConfigure, there is a minimum input current limit. The actual limit differs for each model.
After setting the input current to a value below the limit, it will automatically be increased again to the limit.
Note that is still possible to set the input current limit to 0. When set to 0, the system will be in passthrough (charger disabled). "
I am puzzled that I couldn't verify this last sentence. I have set my Multi 3000/24/70 to zero input current, but the Venus GX changes automatically to "3A" and the charger seems to stay ON (I would like to disable it at times).
What am I missing?