question

felix1904 avatar image
felix1904 asked

Cerbo GX Firmware 3.11 VRM problems

Hi, i just updated my cerbo gx to fw 3.11. unfortunately my vrm portal and also remote console no longer looks the same as before. my pv inverter which is integrated with an EM24 disappeared. The device list in VRM and Cerbo menu shows the EM24...

the update was needed because of incompatibility to my new MP2 48/5000...

is this a firmware bug or do i have to set all from begin ? last time i did the update this was even the same. after i´ve undone the update to the older version before everything was fine again.

thanks for your help !

cerbo gxfirmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
s1277 avatar image
s1277 answered ·

I have never seen release notes on SW or known or fixed bugs

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

felix1904 avatar image
felix1904 answered ·

i solved the problem. AC Input was disabled after the update!

Remote Konsole - settings - System setup - Ac in 1 -> Grid

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.