question

alaskannoob avatar image
alaskannoob asked

Can I plug temp sensor into Cerbo GX while it's powered?

sensors.jpg


Can I plug this temp sensor (the one on the left here) into my Cerbo GX while it's powered on or should I turn it off first? Many thanks!

mppt rs
sensors.jpg (534.7 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
cjsps avatar image
cjsps answered ·

I have found that the sensor with the blue tag doesn't work.

Try the one on the right and also check it on another input.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

alaskannoob avatar image alaskannoob commented ·
I'll try that, many thanks!
0 Likes 0 ·
alaskannoob avatar image alaskannoob commented ·

That was it. Swapped them out and now all is well. Thank you!

0 Likes 0 ·
pwfarnell avatar image
pwfarnell answered ·

I think that the temperature sensor on the left is the wrong type for using on a Cerbo GX. This is item number ASS000020000 and is from sny RS solar inverter, also known as Type C. For the Cerbo you need ASS000001000 ot Type A which is the one on the right in your picture.

See

https://www.victronenergy.com/live/temperature_sensors

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

alaskannoob avatar image alaskannoob commented ·
That was it. Swapped them out and now all is well. Thank you!
0 Likes 0 ·
iammotorhomeless avatar image
iammotorhomeless answered ·

@AlaskanNoob I can't see why you couldn't... but me, I'd turn it off first

7 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

alaskannoob avatar image alaskannoob commented ·
Yeah, I would normally do the same but I'm on my second Cerbo GX because the first one I had died after I re-connected power to it. So I try to avoid unplugging and plugging it back in if I can.
0 Likes 0 ·
iammotorhomeless avatar image iammotorhomeless alaskannoob commented ·

@AlaskanNoob what voltage are you running into your Cerbo GX
some of the older ones did not like over 48v, but newer ones should be fine


1 Like 1 ·
Show more comments