I think the title is pretty self explanatory, I found myself in a situation where I cannot get the MPPT to produce any power (or almost zero) when the pylontech bms say the battery is full.
Additional information: I work in ESS mode 1 (keep battery full), and I have DVCC enabled, as per the guidelines here:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
and Here:
https://www.victronenergy.com/media/pg/CCGX/en/dvcc---distributed-voltage-and-current-control.html
Of course I have feed-in enabled.
This setup was perfectly working just few days before I started to update my cerbo GX and multiplus 2 firmware upgrade. That's why I am thinking about a regression
Side note: My issue seems very close to this one: https://community.victronenergy.com/questions/22506/ess-ac-dc-coupled-feed-in-excess-solar-charger-pow.html
Unfortunately