question

bundyblu avatar image
bundyblu asked

JK BMS CAN port

Can I direct connect a JK BMS CAN port to a Cerbo GX

BMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
kevgermany avatar image
kevgermany answered ·

Check with the BMS supplier.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bundyblu avatar image bundyblu commented ·
I checked with the BMS supplier. They say it depends if Victron support the JK protocol.
0 Likes 0 ·
rvicev avatar image
rvicev answered ·

https://off-grid-garage.com/battery-management-systems-bms/

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bundyblu avatar image bundyblu commented ·
Thanks for thew link, I will check it out. I have watched many of Andy's videos.


0 Likes 0 ·
sgrigor1 avatar image
sgrigor1 answered ·

Also, if you already have JKBMS, you may add this interface: https://solartech.ro/interfata-modul-jkbms-comunicare-invertoare-fotovoltaice/

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bundyblu avatar image bundyblu commented ·
Thank you. I have two JKBMS's. I will look into this also.

I do not have the Victron Cerbo GX yet, It will arrive soon.

I may be suprised and plug it in with the cable I made and it may work.

That will make me very happy if it does.



0 Likes 0 ·
stokki avatar image
stokki answered ·

Hi, did you get it to work over CAN?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.