Hallo All Victron lovers :-)
I need to make a cusom cabel from my REC BMS to GX Cerbo
I got the the SUB-D db9 and RJ45
i think :-) it is like this:
REC-BMS SUB-D:
Pin 2 - CAN L
Pin 3 - GND
Pin 7 - CAN H
Cerbo GX RJ45:
Pin 3 - GND
Pin 7 - CAN H
Pin 8 - CAN L
Right ??
or shall the CAN H and CAN L Crosset like TX and RX normally should?
Skærmbillede 2023-10-13 075424.png