This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Phoeinx 12/1200 inverter. i have a circuit breaker 170a between the battery and inverter. when I plug in my ECOFLOW Delta 2 to rechargfe it, the circuit breaker cuts out during load. The delto 2 has ajdustable input power for recharging the battery. it seems that I can set the power input at 300 watts with no problem so far. But anything higher than that all the way up to 1000 watts. NO GO. SOMEONE PLEASE HELP AND EXPLAIN HOW TO FIX THIS PROBLEM.
Cheap ones are known for making problems.
A fuse is always a better solution for DC.
STech 140amp and it seems that the inverter was installed at the auxilliary battery location under the drivers seat
Today I connected and electric heater to the inverter and it ran for about 35-45 seconds and then cut out with a solid red light next to the on off switch.
