This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
in our system with RS48/6000 Consumption is not displayed, although another thread mentioned that the RS48/6000 should be able to display it.
In this system were used Multiplus, which was replaced (21.9.2023) by RS48/6000 (fw v1.12), and from this date VRM do not show Consumption (see picture, red column is missing from 21.9.2023). Maybe it has to do with the multiplus being used before?
Thanks for any ideas.
How is it connected to the GX?
VE.CAN on RS to VE.CAN on Cerbo, CAN terminated on cerbo and on RS too.
I thing terminators are necessary on both sides:
Cerbo has fw 3.10. latest is 3.11. but in changelog is nothing about RS inverters etc. If I understand well, Consumption has been added in 7/2022:
We will try to update, will see.
Hi @Simoly
Is it possible to power cycle both the GX device and the Inverter RS?
There is also a new firmware version for the inverter RS, as a standard procedure, can you please update that first and see if it resolves before I escalate it?
Hello @Guy Stewart (Victron Community Manager) ,
fw updated, all devices restarted (unpluged from power) today morning:
Maybee we can wait, but is seems nothing changed. If you will want acces to vrm, it is not problem od course.
Thanks.
