question

jibap avatar image
jibap asked

Newer Venus versions from 2.22 (Rpi) not working for me

Hi everybody !

I have VenusOS v2.22 which works perfectly on my RasPy and the newer version updated automaticaly few month ago when v2.23 was available (February) but i downgraded to v2.22 because some issues appeared...

I tried last week to check for the latest version (2.32) and the same issues encountered, i mean :

- AC Loads, sometimes display no value

- My Inverter is displayed "not connected"

In v2.22, i change only language in french (my language ;-)), and activate "has DC System" to log Inverter self-consumption, and it's all, no more configuration.

Why it not works in v2.32 ? Need some settings ?

Thanks you for help !

Venus OS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
jibap avatar image
jibap answered ·

Finally, i updated in last version and all is OK, i think that the original issue was a firmwares compatibility between devices and Venus OS...

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nebulight avatar image
nebulight answered ·

Interesting, I have a Pi and I don't have those issues (same settings but in English). My french is a bit rusty but maybe I can switch to French to see if I have the same issues.

8 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jibap avatar image jibap commented ·

It would be very surprising if these issues are due to language... What are your elements connected ?

I have 3 :

- BMV-700

- MultiPlus 48/3000/35-16

- BlueSolar Charger MPPT 150/60

Thx for your interest !

0 Likes 0 ·
nebulight avatar image nebulight jibap commented ·

I also have three:

BMV-712 with a ve.direct to USB cable

SmartSolar 100/50 MPPT with a ve.direct to USB cable

Multiplus 12/3000/50 with a MK3 to USB adapter

So far I haven't had any issues but there is no load on the inverter so I can't tell if there is a problem :(

0 Likes 0 ·
Show more comments
jibap avatar image
jibap answered ·

Hello, there is news !

i'm still in v2.22, but from few weeks ago, the MPPT (PV load) disappear randomly...

If i reboot the venus OS, it is displayed again, and sometimes it reappear alone.

Any idea ?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources