This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, my cerbo needs a reboot every 2 or 3 weeks to re-establish WiFi/internet connection, not sure why this happens but any ideas welcome. But also would like to know best way to manually reboot when there is no connection. Pull the power plug out or press the reset button. I remember reading somewhere that the reset button would lose settings and obviously don't want to do that. TIA...
Enable the automatic reboot on comms failure under the GX settings _> vrm portal.
For reboot go to the Menu > Settings > General and press reboot, no need to mess with wires or reset buttons. Agree with answer above on loss of contact on VRM settings.
