This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Given:
I have just finished my installation of my RV solar system. All components except batteries are Victron. Now want to define the settings for the MPII first, then later the MPPT.
Setup: Just 160 watts on the roof of panels to the MPPT 150/35, to the Lynx, MPII and 4 100Ah LiFePO4 batteries.
Here are the settings:
Accept MultiPlus II, JB settings.pdf
I am not a EE, a retired Nerd, so suggestions on how to improve, or fix, my current settings would be greatly appreciated.
Thanks
Doesn't anyone one here have a MPII and can advise suggestions from what my values are?
I'm really hoping to hear from someone that has only 30 Amp service in their trailer and the MPII settings they have found that work the best for them.
I'm in Europe, so...
Looks good except for ground relay. Most mobile systems need this for safety. But if you already have a neutral/earth bond, leave it off.
You might want to increase repeated absorption to the max, LiFePO4 doesn't need it.
