This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I would like to use 2x multiplus ii in a 3phase grid the multiplus should provide pase 1 and 2 and phase 3 is only connected to the grid (and of course falls down if grid is down).
My question now is. I would prefer to use the multiplus to p1 and p2 (with 120° phase shift) and not in parallel mode.
Is this possible ? And will 3phase consumers still work if 2 phases come through the multiplusˋs and one direct from grid?
Best regards
No, don't have only two phases powered, the 3rd phase would possibly feed back to grid when grid is down, and / or have unwanted effects.
-ESS mode (feedback to grid) will not be possible
-I'd either make a real 3 phase system, or have all 3 phase loads before the inverters, and two separate groups behind the inverters.
Hello, same problem... How did you fixed it? - Thanks
