question

peterkulisek avatar image
peterkulisek asked

Pylontech US5000 low voltage

Hello,


please can somebody help me how to solve problem with low voltage on one battery? I installed brand new pylontech US5000 with MPII as ESS, bud one of the batteries (n.2) is not working because of 2.33V on one of the cells.

Battery n.2 is few seconds online and then few seconds offline.

(Linkport connection is correct - I tried change master battery)


img-7295.png

img-7294.png

img-7273.jpeg

Thank you a lot for advices,


Peter

Pylontech
img-7295.png (548.7 KiB)
img-7294.png (550.3 KiB)
img-7273.jpeg (2.4 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@PeterKulisek

Not very much you can do. This is a warranty case.

Return to supplier.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Looks like a HW issue.
You should contact the seller from whom you bought the batteries.

13 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dennibu avatar image dennibu commented ·
  • Hallo @Matthias Lange - DE , es könnte nicht sein, dass die Spannungen der beiden (Nagelneuen) Akkus so weit auseinander liegen, dass das BMS den zu hohen „Ausgleichstrom“ abschaltet. Oben sieht man nur einmal beide 5000er (min. max. weit auseinander) und einmal die 1.Batterie mit rund 3,4V. 2,33V ist schon sehr tief aber wenn alle Zellen der Batterie 2 um 2,3V liegen würde ich versuchen die 2 Batterien auf 3,4 zu bekommen? Sag's direkt, wenn ich blödsinn schreibe.
0 Likes 0 ·
Show more comments