Hello everyone,
System Description;
6x Quattro 240VAC 60Hz / 8000VA
20x LiFePO4 25.6V 200A
I will set the Quattros in the system to 240VAC 60Hz (L1-L2)
The problem is, how can I provide L1+N (120VAC) or L2+N (120VAC) from this system.
So I will get L1+L2 (240VAC 60Hz) from the Quattro output. But my requirement is L1-L2+N
Is this possible without an autotransformer? The reason I don't want to use an autotransformer;
Input 1 - Shore connection
Input 2 - Generator connection
As far as I know, the autotransformer creates a neutral connection point thanks to the earth relay.
I look forward to your advice and comments.