question

wanni avatar image
wanni asked

Add battery to existing Multiplus with 7,5kWh

I would like to extend my storage with an additional battery. Is there a possibility to add a second battery (different brand/size) with a second MP II or is there another solution?


wanni

Multiplus-IIbattery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

Not easily. If the batteries are matched in terms of voltage, then it is possible to operate the 2 sets in parallel. MPII units can only be operated in parallel with a common battery, so that would not be a solution. You could operate the systems independently though, but would be faced by different soc in the 2 systems - however, you could use the larger system to feed the ac in of the 2nd multi, and set the 2nd multi to ignore AC in, so it would use it's own battery first, then switch its load to the original multi once the battery goes low.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources