Are there any specified Minimum Power Requirements for the attached 3-ph generator on AC-In2 mains of a 3-phase Quattro-I 10kVA configuration?
I did not find any answer in the Victron documentation.
My current Victron configuration:
Off-Grid system
3-ph Quattro 10kVA
20 kWh Victron smart Battery
LYNX smart BMS
20kWp solar panel DC coupled with Victron RS solar inverters
H2-generator and fuel cell system attached to AC-IN1 (3-phase 6kW max. output power) from HPS GmbH with its own solar panel system, H2-storage for reconverting H2 to 1536 kWh electric power through fuel cell
My next step:
I need to add now a power generator to AC-In2 in order to prevent a black out if the hydrogen power system on AC-In1 will fail or H2-battery will run empty before winter time ends
So I need to know if there is a minimum power requirement specified, the 3 Quattro 10kVA units will need on their AC-IN2 input in order to start charging my battery and supplying my power consumption of the building which is about 1 kW in average.
I think about purchasing a (diesel-)generator with 5-7 kW output power range.
Regards RudiD