This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have an Fischer Panda Generator connected to the Cerbo using the interface box. I did the update to 3.10 and all info for Autostart settings and Motor data are missing. I searched all other settings but can not find it. I went back to 3.0 and all is ok again. Do i need to change something on the interfacebox ??
Hi @SV_UNSInn thank you for your report! we looked into this, and found the problem.
We're working on a fix; which will first be available as a beta version; and soon (one or two weeks I expect) as v3.11.
all the best, Matthijs
Thank you for your fast answer.
@SV_UNSInn Did updating to v3.11 resolve your issue?
Hello,
Is it the same point has since I've updated to 3.10 I can start the Genset but I can't stop it anymore !
The relay physically don't change state. (I need to go to the setting to change it to manual to stop the genset)
Xavier.
Hello, same issue, wnt back to V2.94 ich was the last stable one i had...
anyone solved the auto start/stop on any version when 2 gensets fischer panda installed?
