question

jjuzwik avatar image
jjuzwik asked

Stored Trends not showing data when connecting remotely via VictronConnect

When I use VictronConnect to try to view stored trends on my mppt remotely through VRM, I only have access to 1 minute of data. Zooming out to 1 day shows nothing. Everything under the ‘history‘ tab does show up correctly.


When connecting directly with Bluetooth, stored trends works fine, and shows data from 30+ days ago.


Setup is a 100/20 mppt Smartsolar, connected to VRM. This allows me to use VictronConnect to connect remotely to the mppt from anywhere.


This feels like a software bug. Firmware is the latest on the mppt. My VC apps on both an iPad and an iPhone have the same problem.


Here is a video I made showing exactly what is going on:


https://youtu.be/5kW7t0uG-oU



Any ideas?

Thanks all!


VRMMPPT SmartSolarVenus OSVictronConnectstored trends
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @jjuzwik,

This is a limitation of the design.

The stored trends data is stored in the memory of the bluetooth module, so it is only accessible via that bluetooth interface.

When connected remotely via a GX to VRM the data needs to be accessed via the VRM online portal (usually in the advanced widgets).

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jjuzwik avatar image jjuzwik commented ·

Interesting…. I’m curious why am I still able to see the daily history Just fine? Is that not also stored in the Bluetooth module?

0 Likes 0 ·
Show more comments