question

leoo avatar image
leoo asked

Victron EV Charging Station Status 21

The CCGX-Modbus-TCP-Register List 3.00 lists the following states of the com.victronenergy.evcharger/Status endpoint:

0=Disconnected; 1=Connected; 2=Charging; 3=Charged; 4=Waiting for sun; 5=Waiting for RFID; 6=Waiting for start; 7=Low SOC; 8=Ground fault; 9=Welded contacts; 10=CP Input shorted; 11=Residual current detected; 12=Under voltage detected; 13=Overvoltage detected; 14=Overheating detected

Status 21 is not among them, yet it is reported by the endpoint. What does it mean?

1694505801422.png

Multiplus-IIModbus TCPev charging station
1694505801422.png (66.4 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·

https://www.victronenergy.com/ev-charging/ev-charging-station-ns#technical-information

Hi, please have a look at the modbus tcp register table for EVCS, it is explained (register 5015)

0 Likes 0 ·
leoo avatar image leoo Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
Thanks, these values make sense. I am reading the values from the Cerbo Modbus and not directly from the EVCS so I thought this list would not apply.
0 Likes 0 ·
Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ leoo commented ·
try reading directly from evcs, more parameters are available from there
0 Likes 0 ·
0 Answers