This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all, installing a Lynx distribution and i see that it only accepts maxi fuses.
I will be connecting the following-
2 x 12v 100/20 mppts
1 x 12v 100/30 mppt
1 x dcdc orion tr smart 30
The smallest maxi fuse i can find is 40amp.
To me that'd be too high for the above items, has anyone found smaller maxi fuses for these types of components?
Cheers
As long as your cables are sized for 40A, this is fine.
A Lynx Distributor is too expensive (proportionally) for such a small system.
Use smaller busbars (you can even DiY) and fuse holders.
I did look at the cost comparison and it worked out close enough for me because i like how neat it'll all look too.
