question

tropicaltexan avatar image
tropicaltexan asked

Victron solar start sequence

This is our system,

4, 300ah batteries 2s2p for 24v

Smart shunt

2400watts solar going through 2 150/45 controllers

Quattro 5000 24v

CERBO GX touch 50

Is there a sequence of programming before we make everything "hot"?

Thanks!

Pam

img-20230909-121707.jpgimg-20230909-121718.jpgImage Caption

wiring
img-20230909-121707.jpg (2.1 MiB)
img-20230909-121718.jpg (1.8 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@tropicaltexan

Not really. Just do each one.

What you should do to remain safe while you are altering base programming, is power up from the battery with no charge sources connected. As in no AC in and no PV switched on. Then you will be good after programming to let the system run as normal.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.