question

sas avatar image
sas asked

SmartShunt IP65 - Voltage on VE.Direct

My SmartShunt works via Bluetooth, but gets no connection to Cerbo via VE.Direct.
So I measured the signals on the VE-Direct. Powersupply, stable 2.65V (!?) independet of the powersupply of the SmartShunt. Serial signal on Tx of the Shunt. No answer from the Cerbo.

Are the 2.65V normal for a SmartShunt. I dont believe that the input of the Cerbo works with such a low voltage.

SmartShunt
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

seb71 avatar image seb71 commented ·

My SmartShunt works via Bluetooth, but gets no connection to Cerbo via VE.Direct.

The VE.Direct cable is OK?

0 Likes 0 ·
sas avatar image sas seb71 commented ·
Yes the cable is Ok. The 2,65V are also on the connector of the SmartShunt.
0 Likes 0 ·
0 Answers