Hi, my load values seems off.
Why is my DC load lower than the AC load?
This changes when the load is above 2kw. Then it shows more DC load than AC as I would expect because of losses.
Is my smart shunt broken?
asked
AC loads not the same as DC load
The inverter and MPPTs power values are less accurate.
You could check the SmartShunt zero current calibration to rule out that possibility (see the manual on how to do it). Especially if you clicked on the "Calibrate" button at some point.
You have both a DC side and an AC side in your system, yes? Isn't it possible to have DC loads and AC loads simultaneously that are at different levels? For example, the DC side has a load from a bunch of DC lights and a propane detector, while the AC side has a load from something plugged into an AC receptacle.
I do have the EXACT SAME issue and it's driving me crazy.
From one of the answers here the SmartShunt might be "broken" - how so, and how it breaks to always be like 50-80W behind?
Hello,
has anyone solved the problem yet?
I have exactly the same problem.
No, only the Smart Shint you can integrate in Venus (DC), for AC there are some other meters you can use.
