Had a fully working Global link 520 installation until recently.
The device remains connected to VRM albeit with a pretty poor LTE signal (always been that way) and is continuing to report data on VRM.
But I can no longer connect to the device locally using Victron Connect.
The device shows up on the “my devices” list as normal, but the “connecting” bar reaches 60%, then starts over 2 more times, reaches 60% each time and finally posts the “unable to connect” message.
The only thing that has changed is the Victron Connect app.
I am using an iPhone 12 Pro Max with IOS 16.5.1 and Victron Connect 5.93.
Reinstalling Victron Connect does not fix the problem; all other Victron Connect devices are working properly.
Any thoughts?