question

ak-flocke4 avatar image
ak-flocke4 asked

No loading or unloading of multiplus 2. Battery low although high voltage.

My system (Multiplus II GX, 48V with pylontech US3000c) was running 1 year wo problems. After I changed battery type from LiFePo4 to Pb-acid and back to LiFePo4 I got low battery alarm. Since that moment there was no ESS relais test done anymore. I loaded the battery up to 50V and more (by direct charge) but still "low battery" alarm.

The Switch is on "I". I did many resets (AC off / Switch Off - also pos. "II" tried) but no change / no reaction of "ESS relay test" (no clicking of relais on Switch or power ON). Communication to battery is via CAN-Bus, it works fine and BMS has no alarms or failure.

Any Help available? Thanks!

ESSlow battery warning
5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image ejrossouw commented ·

Have you changed the battery settings as per https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom ? How many batteries and which MP?

0 Likes 0 ·
Show more comments
seb71 avatar image seb71 commented ·

After I changed battery type from LiFePo4 to Pb-acid and back to LiFePo4

Do you still have the ESS Assistant?

0 Likes 0 ·
Show more comments
1 Answer
ak-flocke4 avatar image
ak-flocke4 answered ·

My Problem was solved by updating OS and Firmware on latest version. Unbelievable!...But I am lucky!

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

What is ESS training video

ESS Quick Installation Guide

ESS design and installation manual

Additional resources still need to be added for this topic