This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have several SmartSolar MPPT 75/15's deployed. These locations have access to the internet via wifi and ethernet. I would love to be able to monitor these remotely without investing the extra cost of the LoRaWAN modules. The product page says " If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere;" But I can't find any documentation on this feature. Any help would be greatly appreciated.
Access to VRM requires a LoRaWAN Module, or more commonly a Venus-device.
Some documentation is here - https://www.victronenergy.com/live/vrm_portal:getting_started
It is possible to use very low cost raspberry pi units - but this is unsupported and requires you to do some of your own research. Others users here who have experience may be able to help.
Raspberry Pi's are not recommended for use in customers systems.
I am currently using my old Android 7 phone near the MPPTs and Airdroid to stream it to my PC or directly to my Android phone.
You can also set up an old Windows laptop/desktop near the site, and make some DIY VE.Direct cables, and connect them all to the USB hub. Then you can use the Victron Connect app for Windows and monitor them all at once on a big screen and stream it via Chrome Remote Desktop, Anydesk, Teamviewer to your phone or a PC.
If you are looking for a Remote VRM solution, then you can try the Raspberry Pi method which is available on the internet.
