Hi everyone, hoping some will have a solution to the following problem. I have 2 Quattros 48/15kv in parallel configuration. When the system is in passthru mode with output breakers in the off position, I have 1.5 amps of current measured on both input legs of each inverters for total of 3 amps from the grid. I Reconfigured both inverter in stand alone mode with same results. I also restore each inverter to default settings with no change. I also have all the latest firmware installed. My parallel system has separate input & output breaker, and equal wire lengths on input and output wire feeds. GX touch confirm same current reading of 3 amps but only shows 90 watts being consumed. If you multiply 245 volts by 3 amps it should be showing 745 watts. I'm aware of reactive, true, and apparent power scenario but as far as power company is concerned I will be paying for 745 watts per hour. That will cost me $56.00 per month if i was to stay in passthru mode.
I would appreciate any help you can offer!
Thanks,
Daniel