question

broesel avatar image
broesel asked

equal strings on MPPT 450/200 not producing the same

Hi!


I have a Strange effect on a new MPPT 450/200.
There 4 identical Strings attached to the trackers.


When Sun starts in the morning you see all trackers rising identically, excpet tracker 2: It stays round about 10-20W below the other 3.

When i swap the strings, you see that it is not the string itself, because it stays on tracker 2 with the lower Wattage.

So somehow the MPPT gets less power on its Tracker 2 - during the day this normalises usually.
Anyone has seen the same or an idea what it might be?


Best regards

Broesel


mppt rs
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

seb71 avatar image seb71 commented ·

It stays round about 10-20W below the other 3.

Is this a typo?

0 Likes 0 ·
Show more comments
1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Broesel,

A small variation between the strings is nothing to worry about.

I would guess the most likely reason is a variation in the accuracy or calibration of the component that is doing that measurement.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.