MPPT Absorption and Bulk Blinking back and forth and NO Solar Input.

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

ncrjamie asked Jul 1, '19

Also anyway I can just download the error codes and print them?

MPPT Controllers

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-07-01T18:27:31Z

Charlie Johnson answered · Jul 01, 2019 at 06:27 PM

Which MPPT? What is the battery voltage for the battery connected to the MPPT output?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-07-02T20:04:21Z

ncrjamie answered · Jul 02, 2019 at 08:04 PM

I just it off for a few minutes, then it reset and worked. I am using a 12 volt goal zero

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.