This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I would like to use a original switch on my boat to turn the inverter {on/off/inverter} like the switch on the quatro. I have the Cerbo GX. Can I use a digital input or something else to setup this "switch"
I know there is the digital multiplus panel with the same function so maybe someone can advice me
You could use the digital inputs (you would need 2, one for inverter position and one for charger/passthru only) with a node red flow.
Looks so interesting, I have been trying to find a similar project to pick it up from there, but I cannot find a similar one.
I am thinking to control the state of the quarto by a rotery swisch (0,1,2)
0 off
1 inverter
2 charter only
You say there is a way to use the relay for it, but can I use the relay as a input?
Or do I need to use the IO input?
My concern is that there is no good input for this..
Maybe you have some tips where to look
You could use "guimods" and get after configure by click on the MP the switches:
