question

Jordy avatar image
Jordy asked

Cerbo GX make my own digital multiplus switch

I would like to use a original switch on my boat to turn the inverter {on/off/inverter} like the switch on the quatro. I have the Cerbo GX. Can I use a digital input or something else to setup this "switch"


I know there is the digital multiplus panel with the same function so maybe someone can advice me

MultiPlus Quattro Inverter Chargercerbo gxDigital Multi Control
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
derrick thomas avatar image
derrick thomas answered ·

You could use the digital inputs (you would need 2, one for inverter position and one for charger/passthru only) with a node red flow.

3 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Jordy avatar image Jordy commented ·
Great thanks for the reply, if I use this inputs where to setup the value so the GX turns it into action
0 Likes 0 ·
derrick thomas avatar image derrick thomas Jordy commented ·
Use node red (Venus os large)
0 Likes 0 ·
Show more comments
chrisrbg avatar image
chrisrbg answered ·

You could use "guimods" and get after configure by click on the MP the switches:screenshot-2023-08-19-225621.pngscreenshot-2023-08-19-225636.png


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.