question

Patrick avatar image
Patrick asked

Is there a way to test the allow-to-charge (ATC) and allow-to-discharge (ATD) manually?

I'd like to be able to trigger the ATC\ATD on\off signally to test my installation? Is there a way to do this?

ty!

lynx bms
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

@Patrick Sure, you can disconnect 1 of the BTV cables from the BMS to simulate a problem with the batteries balance, temperature or voltage.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Patrick avatar image Patrick commented ·

Thanks for the reply @klim8skeptic.
What do you mean by BTV?

0 Likes 0 ·
Show more comments

Related Resources

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic