This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there a way to limit the charge current of the Orion charger? My wiring allows for max 10A otherwise the voltage drops too much.
I could not find anything about that in the configuration menu.
If it can't be configured, is there a feasible workaround? Running new wires won't be possible with any reasonable effort, and 10A is really all I need as a charge current.
If the current is limited by the cables the voltage drop only applies at high currents. In later lower-current charging states you will have the full voltage (by basic R = U/I relation)
There's no current control. It's limited by the battery you're charging.
is there any device known, which offers to limit currents?
