question

tareq avatar image
tareq asked

MPPT 150 | 85 not outputting any power

Hi Everyone,


Could you please advise what is the solution why the MPPT has an output voltage but no power? However, there is another unit on site and it is working well where the system has been installed just a month ago.

Please see the image below


1692019324586.png


MPPT SmartSolar
1692019324586.png (12.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@tareq@ryse.energy

Most likely a reverse polarity connection on the PV side of the mppt.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tareq avatar image tareq commented ·
Thanks for your comment.

Honestly, I am not on site, so I will let the supporting team check this.

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @tareq@ryse.energy

There is quite a comprehensive troubleshooting step by step guide here - https://www.victronenergy.com/media/pg/SmartSolar_MPPT_RS/en/troubleshooting-guide---mppt.html

Sometimes connecting to VictronConnect will tell you with a pop up “why is my MPPT off?”

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tareq avatar image tareq commented ·

Thanks for this!

Honestly, I have seen this before.

0 Likes 0 ·
Show more comments