question

Bruce Rattray avatar image
Bruce Rattray asked

BlueSolar MPPT 150/85

I have a BlueSolar MPPT 150/85 (Firmware ver 2.02)with the 2 Canbus ports only,connected to

a CCGX ,which connects to a Multiplus via VE Direct. Is there a way to modify settings on the MPPT

besides using the panel buttons and the LCD display? The LCD has a few segments which are not

readable so cant see the values reliably to make changes ...

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
seb71 avatar image
seb71 answered ·

VictronConnect on a PC, VRM tab.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Bruce Rattray avatar image
Bruce Rattray answered ·

Thank you...my understanding is that one needs the mk3 usb for victronconnect app and the mk2 does not work with the app? Will the values be brought over from the mppt to CCGX on canbus and then to the muliplus on VEbus and then to the mk3?

9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image nickdb ♦♦ commented ·

The app allows you to access the MPPT settings remotely via the VRM remote tab, provided it is visible via the GX and VRM.

0 Likes 0 ·
Show more comments
seb71 avatar image
seb71 answered ·

Is that some vey old MPPT model?

Anyway did you try and did not work?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.